Products

Our product development takes place in top professional
R&D-departments, where our engineers are always working
to develop new innovative products in co-operation with our customers.

GPS-C MU 3/TETRA/l

GPS Antenna with 3 dB Whip for the TETRA Band

  • External antenna whip mounted on the GPS-Combi mount.
    • Black-chromed, stainless steel whip.
    • 3 dB Gain for the TETRA Band.
    • Easily removable whip for car wash.

Description

  • GPS-antenna for fixed installations.
    • Full hemispherical coverage.
    • Built-in high-gain, low-noise amplifier.
    • Right-Hand Circular Polarization (RHCP).
    • 5 V supply voltage (3 V respectively 12 V available on request).
    • DC supply via RF-connector.

 

 

ORDERING DESIGNATIONS

TYPE PRODUCT NO.
GPS-C MU 3/TETRA/l 132000130

SPECIFICATIONS FOR WHIP

ELECTRICAL  
MODEL GPS-C MU 3/TETRA/l
ANTENNA TYPE 5/8 λ mobile whip antenna
FREQUENCY 380 - 400 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN Approx. 3 dB (acc. to EIA RS-329-1)
BANDWIDTH ≥ 20 MHz @ SWR ≤ 2.5
SWR ≤ 1.5 @ f.res.
MAX. POWER 25 W
MECHANICAL  
MATERIALS Whip:
Black-chromed, conical stainless steel
Spring:
Black-chromed brass
COLOUR Black
HEIGHT Approx. 450 mm
WEIGHT Approx. 60 g
MOUNTING On the GPS-Combi mount

 

 

SPECIFICATIONS FOR GPS-COMBI MOUNT

ELECTRICAL General specifications
MODEL GPS-COMBI MOUNT
ANTENNA TYPE Active patch antenna
FREQUENCY 1575 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Circular right-hand
COVERAGE Hemispherical
GAIN 28 dBic in axial direction (typ.)
CROSS-
POLARIZATION ATT.
> 10 dB (typ.)
SELECTIVITY > 45 dB down @ ± 45 MHz
BUILT-IN AMPLIFIER  
GAIN > 30 dB (typ.)
NOISE FIGURE < 1 dB (typ.)
P 1dB Approx. +7 dBm
SWR (output) ≤ 2.0
SUPPLY VOLTAGE 5 ± 0.5 VDC (3 V resp. 12 V on request)
CURRENT
CONSUMPTION
Approx. 25 mA
MECHANICAL (only for the GPS-part)
MATERIALS Cu-nite brass
Stainless steel
Reinforced thermoplastic
ANTENNA COLOUR Black
TEMP. RANGE -35° C →+75° C
CONNECTOR FME (male for GPS) +
FME (female for mobile antenna)
RECOMMENDED
INSTALL. TORQUE
4 ± 0.5 Nm
DIMENSIONS (H x L) Approx. 30 x 89 mm
ROOF THICKNESS Max. 2.5 mm
WEIGHT Approx. 114 g
MOUNTING ø18.0 mm dia. hole for roof thickness up to 2.0 mm
ø18.5 mm dia hole for roof thickness 2.0 - 2.5 mm
Tools for mounting included

MOUNTING INSTRUCTIONS

 Do not use sealer on rubber gasket or other places.

 

 

CABLE MOUNTING

 

 

TYPICAL RESPONSE CURVE

 

 

VERTICAL RADIATION PATTERN

See what we are up to

Connect with us online, to get latest news

and see where the next exhibition is going to take place

Exhibition Calendar

We are Social

APN Logo Blue