Products

Our product development takes place in top professional
R&D-departments, where our engineers are always working
to develop new innovative products in co-operation with our customers.

Z-Mount

Low Profile Mobile Antenna Mount with Toggle Joint

  • Can be used together with all PROCOM mobile antenna whips provided with toggle joint.
  • Installation possible everywhere on the car.

DESCRIPTION

  • Particularly well suited for rooftop-mounting because of very low internal protrusion and ability to be installed exclusively with access from the outside. Models with roof thickness from 2 mm to 7.5 mm mounting from the inside.
  • Hole diameter: 21 mm.
  • Mounting body made of stainless steel !
  • Wide variety of antenna whips available in the frequency range up to 470 MHz.
  • Choice between two connection principles:
    • Z-mount : FME-connection (supplied without cable).
    • ZP4-mount : Permanently attached 4 m cable terminated with FME-connector.
  • Available in bright or black (black plastic parts for both versions).

ORDERING DESIGNATIONS

TYPE VERSION PRODUCT NO.
Z-Mount Z-mount (bright)
with FME-system
130000396
BZ-Mount BZ-mount (black)
with FME-system
130000398
ZP4-Mount ZP4-mount (bright)
with 4 m cable and FME-connector
130000388
BZP4-Mount BZP4-mount (black)
with 4 m cable and FME-connector
130000389
BZP5-Mount BZP5-mount (black)
with 5 m cable and FME-connector
130000408

SPECIFICATIONS

MODEL Z-Mount
APPLICATION Low-profile mount for mobile antennas
FREQUENCY 0 - 470 MHz
CONNECTION TO WHIP Toggle joint (for wing screw or hat screw with key)
MATERIALS Stainless steel
Bright or black chromed brass
Environment-proof plastics
COLOUR Black or bright and black
HEIGHT Approx. 40 mm
INSTALLATION DIAMETER 38 mm
BUILD-IN DEPTH 10.5 mm
RECOMMENDED
INSTALLATION TORQUE
7.5 ± 1 Nm
WEIGHT Z-version: Approx. 90 g
ZP4-version: Approx. 230 g
MOUNTING ø21 mm dia. hole (For roof thickness 2 mm up to 7.5 mm mounting hole should be ø22 mm dia.)
ROOF THICKNESS Max. 2.0 mm (Models up to 7.5 mm on request)

 

 

FME-SYSTEM ACCESSORIES

FME-CABLES
TYPE PRODUCT NO.
1 m FME(f) 130000437
2 m FME(f) 130000447
3 m FME(f) 130000457
4 m FME(f) 130000466
5 m FME(f) 130000474
6 m FME(f) 130000483
4 m FME-white(f) 110000064
6 m FME-white(f) 110000066
12 m FME-white(f) 110000068
18 m FME-white(f) 110000069
FME-CONNECTORS
TYPE PRODUCT NO.
FME(f)-FME(f) 130000583
FME(m)-P(m)
(Prolongation)
130000565
FME(m)-N(m) 130000571
FME(m)-FSMA
(Female-SMA)
130000578
FME(m)-BNC(m) 130000566
FME(m)-TNC(m) 130000569
FME(m)-UHF(m) 130000572
FME(m)-MUHF(m)
(Mini-UHF)
130000573
FME(m)-EMUHF(m)
(Elbow-MUHF)
130000582
FME(m)-EBNC(m)
(Elbow-BNC)
130000580
FME(m)-ETNC(m)
(Elbow-TNC)
130000581
FME(m)-SMA(m) 130000577

For further information about other types of FME-cables and FME-connectors, please compare the cable and connector data sheets under accessories in our catalogue.

INSTALLATION

The Z-mount is designed for mounting in a 21 mm dia. hole.

The whip is fastened to the mount by means of our standard ball joint and wing screw system. The adjustable ball joint ensures that the whip can always be mounted in a vertical position independent of the angle of the installation spot.

The Z-mount is particularly well suited for mounting on car roofs because of its ability to be installed exclusively with access from the outside. The Z-mount for roof thickness from 2 mm to 7.5 mm must be mounted from the inside.

However, the antenna can be installed anywhere on the car, as the Z-mount is equally well suited for mounting on e.g. trunk or wing.

A good contact surface on the inside of the car body must always be ensured, thus enabling the base plate to get in direct contact with the metal parts of the car, which is of utmost importance for proper performance of the antenna.

 

1. INSTALLATION DIMENSIONS

Z-Mount-21-22-38-GB

 

2. INSTALLATION STEPS

Z-Mount-inst-step-samlet-GB

Do not use sealer on rubber gasket or other places.

 

 

PLEASE NOTE:

The whips are normally installed on the mount by means of the standard wing screw, but may also be installed using the optional hat screw with key (accessory item).

See what we are up to

Connect with us online, to get latest news

and see where the next exhibition is going to take place

Exhibition Calendar

Latest News

We are Social

APN Logo Blue