Products

Our product development takes place in top professional
R&D-departments, where our engineers are always working
to develop new innovative products in co-operation with our customers.

S.1 series

Centre-fed folded dipole antenna.

  • The S.1 series are of a rugged and reliable construction.
  • The one piece folded dipole incorporates a d.c. short to minimise static interference.
  • The balun assembly is completely encapsulated in epoxy resin, totally preventing moisture ingress, and has been tested to BS5490:IP67.
  • These antennas can be arranged in a variety of arrays in combination with CPS (cable power splitter) series to produce a wide range of radiation patterns.
  • They are supplied as standard with 3 metres of RG 213 cable terminated with an 'N' type socket.
  • Heavy duty and stainless steel options are available.

ORDERING DESIGNATIONS

 

TYPE FREQUENCY PRODUCT NO.
S.1-72 66 - 80 MHz Replaced by 7050060
S.1-82 70 - 86 MHz Replaced by 7050075
S.1-98 88 - 108 MHz Replaced by 7050088
S.1-127 117 - 137 MHz Replaced by 7050118
S.1-160 145 - 176 MHz Replaced by 7050158
S.1-200 192 - 208 MHz Replaced by 7050170
S.1-405 380 - 430 MHz Replaced by 7051400
S.1-380-470 380 - 470 MHz Replaced by S.1-380-470
S.1-445 420 - 470 MHz Replaced by 7051420
S.1-475 430 - 520 MHz Replaced by S.1-475

SPECIFICATIONS 

ELECTRICAL  
FREQUENCY RANGE 66 - 520 MHz
INPUT IMPEDANCE 50 Ω
BANDWIDTH ± 10% of centre frequency
SWR < 1.5:1
FRONT TO BACK RATIO 4 dB
MAXIMUM INPUT POWER 150 W
POLARIZATION Vertical
FORWARD GAIN 2 dBd
3 dB BEAMWIDTH E Plane 85º
H Plane 200º
(Gain & RPE assmes mount on conductive pole)
MECHANICAL  
STANDARD CONNECTION 3 m (118.11 in.) Length of RG 213
c/w 'N' type socket
ELEMENTS (UHF)
(> 138 MHz)
UHF 12.7 mm dia. x 1.6 mm
(0.50 in. dia x 0.06 in.)
wall aluminium alloy grade 6063T6
ELEMENTS (VHF)
(< 138 MHz)
VHF 19.0 mm dia. x 1.6 mm
(0.75 in. dia x 0.06 in.)
wall aluminium alloy grade 6063T6
SUPPORT BOOM 31.7 mm dia. x 2.6 mm
(1.25 in. dia x 0.10 in.)
wall aluminium alloy grade 6082T6
FASTENERS Stainless steel grade A2-70
SADDLE CLAMPS Diecast zinc alloy
INSULATOR Epoxy resin encapsulant
LIGHTNING PROTECTION Direct grounded
MOUNTING BRACKETS See mounting accessories (not supplied)
TYPICAL WEIGHT (UHF) UHF 1.9 kg (4.19 lb.)
TYPICAL WEIGHT (VHF) VHF 2.8 kg (6.17 lb.)
TYPICAL LENGTH (UHF) UHF 1 m (39.37 in.)
TYPICAL LENGTH (VHF) VHF 1.33 m ( 52.36 in.)
TYPICAL WIND LOADING
@ 162 km/h (UHF)
UHF 54 N
TYPICAL WIND LOADING
@ 162 km/h (VHF)
VHF 148 N

MOUNTING ACCESSORIES

Mounting accessories to be ordered separately.

TYPE DIMENSION PRODUCT NO.
1763-100   123001001
UA64-23 25 - 50 mm 123001006
UA64-23 25 - 76 mm 123001007
UA66-24 25 - 50 mm 123001017
UA66-24 25 - 76 mm 123001018
UA66-24 25 - 100 mm 123001019
UA66-24 25 - 115 mm 123001020

 

1763-100

Galvanised steel-cross-over clamp, fits 32 mm (1-1/4") diameter antenna booms to up to 50 mm (2") diameter poles, max. length 1500 mm.

 

UA64-23

Circular cast alloy clamp, gives a good two point fixing, supplied as standard with 4 x 50 mm stainless steel ‘U’ bolts and two half-moon cast spacers to fit antenna booms of 25 to 50 mm diameter. Will also accomodate 76 mm (3”) ‘U’ bolts to fit masts of that diameter. (order UB06).

UA66-24

Rectangular cast alloy clamp, gives a good two point fixing, supplied as standard with 4 x 50 mm stainless steel ‘U’ bolts and two half-moon cast spacers to fit antenna booms of 25 to 50 mm diameter.

To fit 76 mm (3”) masts (order UB06 ‘U’ bolts).

To fit 100 mm (4”) masts (order UB07 ‘U’ bolts).

To fit 115 mm (4 1/2”) masts (order UB09 ‘U’ bolts).

TYPICAL RADIATION PATTERN (E-PLANE)

 

TYPICAL RADIATION PATTERN (H-PLANE)

See what we are up to

Connect with us online, to get latest news

and see where the next exhibition is going to take place

Exhibition Calendar

We are Social

APN Logo Blue