Products

Our product development takes place in top professional
R&D-departments, where our engineers are always working
to develop new innovative products in co-operation with our customers.

PRO-ARPS4-GPS-N-...

4-Channel Active Receiver Power Splitter for 1575 MHz

  • Receiver power splitter for 1575 MHz with built-in high-  dynamic-range low-noise amplifier.

DESCRIPTION

  • To be used where GPS signals are to be divided:
    • Divider with loss compensation for up to four PCPI GPS EXTEND antennas connected to the same GPS antenna.
    • General GPS antenna-signal-distribution systems.
  • Built-in band-pass filter to attenuate unwanted signals and filter the distributed GPS signal.
  • High isolation between outputs.
  • N-female on all ports (other connector types on request).
  • Wide supply voltage range.
  • DC powering either on solder terminal, on DC connector or from phantom voltage on the signal distribution line.
  • Several DC powering options via the signal line available:
    • 5 VDC voltage on input port for DC powering an active GPS antenna.
    • Supply voltage on input port.
    • Supply voltage on all output ports or on output port 1 only.

ORDERING DESIGNATIONS

TYPE PRODUCT NO. DC ON INPUT
PORT *)
DC ON OUTPUT PORTS*)
PRO-ARPS4-GPS-N 210001609 None None
PRO-ARPS4-GPS-N-5VI 210000312 5 V for GPS antennna None
PRO-ARPS4-GPS-N-DCI 210000313 Supply voltage None
PRO-ARPS4-GPS-N-DCO 210001912 None Supply voltage
PRO-ARPS4-GPS-N-DCO1 210001913 None Supply voltage at
output port 1
PRO-ARPS4-GPS-N-5VI-DCO 210001914 5 V for GPS antennna Supply voltage
PRO-ARPS4-GPS-N-5VI-DCO1 210001915 5 V for GPS antennna Supply voltage at
output port 1
PRO-ARPS4-GPS-N-DCI-DCO 210001916 Supply voltage Supply voltage
PRO-ARPS4-GPS-N-DCI-DCO1 210001917 Supply voltage Supply voltage at
output port 1
ACCESSORIES      
ADAPTOR AC/DC 12V EU 240000040   12 VDC/500 mA
ADAPTOR AC/DC 12V UK 240000041   12 VDC/500 mA

*) On units where the supply voltage is present on either input or output ports or both, the unit can be DC powered from phantom voltage on the signal line connected to these ports, or the unit can DC power other units via the signal line.
On units where supply voltage is present on both input and output ports, direct DC pass between the ports is provided.
Please note:
5 V on the input port is for DC powering an active GPS antenna only.
Max. DC current 100 mA.

 

SPECIFICATIONS

ELECTRICAL
MODEL PRO-ARPS4-GPS-N-...
FREQUENCY RANGE 1575 MHz ± 10 MHz
GAIN (INPUT TO ALL
OUTPUT PORTS)
4 dB ± 1 dB
NOISE FIGURE
AMPLIFIER
< 3.5 dB (incl. input filter)
OIP3 > +15 dBm
SELECTIVITY > 20 dB down at ± 100 MHz
IMPEDANCE Nom. 50 Ω
INPUT SWR Max. 3.0, typically < 2.0
OUTPUT SWR Max. 2.0, typically < 1.5
ISOLATION
BETWEEN OUTPUTS
>20 dB
SUPPLY VOLTAGE 8 to 25 VDC
CURRENT CONSUMPTION 50 mA (consumption of external devices
must be added)
MECHANICAL
TEMP. RANGE -30° C → +60° C
RF CONNECTORS N-female
DC CONNECTORS Solder terminal or 2.5 mm barrel connector
DIMENSIONS (L x W x H) 129 (incl. conn.) x 152 (incl. flanges) x 35 mm /
5.08 (incl. conn.) x 5.98 (incl. flanges) x 1.38 in.
WEIGHT Approx. 280 g / 0.62 lb.
MOUNTING ø4 mm (four holes)

 

DC CONNECTOR POLARITY

 

ADAPTOR AC/DC 12V EU - ADAPTOR AC/DC 12V UK

MOUNTING DETAILS

 

Application Example 1. Phantom powering an external unit from the input port.

Example of a GPS signal distribution system with a GPS 4 and four GPS receivers, where a PRO-ARPS-4-GPS-N-5VI is used as active receiver power splitter.
The GPS 4 antenna is phantom-powered from the 5 VDC voltage on the input port.


 

Application Example 2. Phantom powering external units from both input and output ports.

Example of a GPS signal distribution system with a GPS 4 and four x PCPI GPS EXTEND 12V/12V antennas where a PRO-ARPS-4-GPS-N-5VI-DCO is used as active receiver power splitter and at the same time (phantom) powers both the GPS 4 antenna and the four PCPI GPS EXTEND antennas via the signal lines.

The PRO-ARPS-4-GPS-N-5VI-DCO has 5 VDC available on the input port and the 12 VDC supply voltage is present on the four output ports.

The GPS 4 antenna is phantom-powered from the 5 VDC voltage on the input port. The four PCPI GPS EXTEND antennas are phantom-powered
from the 12 VDC voltage on the four output ports.

EU DECLARATION OF CONFORMITY

Hereby PROCOM A/S declare that the product type PRO-ARPS4-GPS-N-... is in compliance with EU Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at:

 

http://procom.dk/images/pdf-for-catalouges/Declaration-of-Conformity-PRO-ARPS.pdf

See what we are up to

Connect with us online, to get latest news

and see where the next exhibition is going to take place

Exhibition Calendar

We are Social

APN Logo Blue